▼Road Alerts
7 Alerts
April 4, 2019 4:57 PM
City crews have begun replacing speed limit signs on Elms Road between SH 195 and Clear Creek Road. The full stretch will now be a consistent 35 miles per hour rather than variable speed limits. School zones will remain 20 miles per hour when active.
The...
Read On...
March 25, 2019 9:26 AM
The westbound lane of Little Nolan Road between Cunningham Road and Saul Drive will be closed tomorrow and Wednesday from 7 a.m. to 4 p.m. The eastbound lane will remain open to through traffic.
The lane closure is for installation of a fire hydrant.
...
Read On...
February 13, 2019 8:06 AM
The southbound outside lane of Trimmier Road near the intersection of Stan Schlueter Loop will be closed beginning tomorrow from 7 a.m. to 5 p.m. The inside lane will remain open to through traffic.
The lane closure is for asphalt repair, which should be...
Read On...
February 12, 2019 3:41 PM
The westbound outside lane of Rancier near the intersection of 38th Street will be closed tomorrow from 7 a.m. to 4 p.m. The inside lane will remain open to through traffic.
The lane closure is for asphalt repair, which should be completed by end of day...
Read On...
February 5, 2019 10:48 AM
Avenue D will be closed from 8th Street to 10th Street beginning Wednesday. All traffic will be detoured for approximately six months.
This project is Phase II of the Downtown Streetscaping Project. It will extend the street, sidewalk, lighting and...
Read On...
January 28, 2019 4:19 PM
Daisy Drive, from Marigold Drive to Zinnia Drive, will be closed January 29 and 30 from 7 a.m. to 4 p.m. The road will be reopened to through traffic at the end of each day.
The closure is for emergency repairs to a sewer line that must be accessed...
Read On...
November 27, 2018 3:07 PM
Northbound Rosewood Drive, between Riverstone Drive and Sulphur Springs Drive, will experience intermittent lane closures beginning November 28. Work will take place weekdays between 7 a.m. and 5 p.m. until complete.
Crews will begin installing a...
Read On...